论文部分内容阅读
三通管设计的锥管布浆器如图1所示。锥管布浆器包括具有中空腔体的水平的布浆总管,布浆总管上设有进浆管与回浆管,进浆管的截面从上到下依次减小。该设计能够在一定程度上增加流量,并且能够起到分散压力、平衡压力的目的。回浆管向下弯曲,该设计能够在重力的作用下便于回浆的实现。进浆管位于布浆总管上方的中部,回浆管位于布浆总管的两端,布浆总管横截面自进浆管向两侧的回浆管逐渐缩小;布浆总管的外侧沿长度方向均匀分布有出浆支管。布浆
Tee pipe tee pipe design shown in Figure 1. The cone beater includes a horizontal cloth main pipe having a hollow cavity. The main pipe is provided with a feed pipe and a return pipe, and the cross section of the feed pipe is reduced in order from top to bottom. The design can increase the flow to a certain extent, and can be used to disperse pressure and balance the pressure. The return pipe is bent downwards, which is designed to facilitate the return of the slurry under the action of gravity. The inlet pipe is located in the middle of the top of the filler pipe. The return pipe is located at both ends of the main pipe. The cross section of the main pipe of the filler pipe is gradually reduced from the return pipe to both sides of the inlet pipe. Distribution of pulp branch. Cloth