论文部分内容阅读
水养水仙需要勤换水,这给莳养带来麻烦。我设计了一种水仙盆,底带排水孔,给水就象浇其他盆花一样,盆子加满就可以,无须换水。其结构和制作如下(见图): 作陶坯时,在盆壁内侧加入一根(或几根)易燃烧或易熔化的物质,制成直径在3——5厘米左右的一根管,嵌入盆壁至盆底。小孔留在盆高2/3处,经烧坯后,盆壁至盆底就留下一个小管道。从外观看是没有痕迹的,内里如不仔细观察也不会发现。加水时盆底放一接水器,水加至盆口即可,多余的水会自
Water Narcissus need to change the water, which brings trouble to raise. I designed a narcissus basin, the bottom with drainage holes, water is poured like other potted plants, pots can be filled, without changing the water. Its structure and production are as follows (see photo): For the ceramic billet, add a pot (or a few) flammable or easy to melt material inside the pelvic wall, made of a diameter of about 3 - 5 cm of a tube, Embedded into the basin wall to the pelvic floor. Small holes left in the basin 2/3 high, after the billet, the basin wall to the pelvic floor to leave a small pipe. From the outside there is no trace of the look, if not carefully observed inside will not find. Add water when the pelvic floor put a water, water can be added to the basin, the excess water will be from