论文部分内容阅读
Rh/SiO2 was prepared for the oxidative bromination of methane. The catalyst was prepared by calcination at different temperatures and for different times to obtain catalysts with different specific surface areas for the purposes of producing either CH3Br or CH3Br and CO. It was found that the catalyst having a low specific surface area (calcined at relatively high temperature) favors the selective oxidation of methane to prepare CH3Br, while the catalyst having a high specific surface area favors the deeper partial oxidation of methane, which is good for CH3Br and CO preparation.The 650 h on stream life-time test revealed that the catalytic performance of the 0.4Rh/SiO2-900-10 catalyst was excellent.Both methane conversion and CH3Br selectivity kept increasing trends during the life-time test.No matter how serious was the Rh leaching during the reaction,the 0.4Rh/SiO2-900-10 catalyst did not deactivate at all.
Rh / SiO2 was prepared for the oxidative bromination of methane. The catalyst was prepared by calcination at different temperatures and for different times to obtain catalysts with different specific surface areas for the purposes of producing either CH3Br or CH3Br and CO. It was found that the catalyst has a low specific surface area (calcined at relatively high temperature) favors the selective oxidation of methane to prepare CH3Br, while the catalyst has a high specific surface area favors the deeper partial oxidation of methane, which is good for CH3Br and CO preparation. The 650 h on stream life-time test revealed that the catalytic performance of the 0.4 Rh / SiO 2 -900-10 catalyst was excellent. Butomethane conversion and CH 3 Br selectivity kept increasing trends during the life-time test. No matter how serious was the Rh leaching during the reaction, the 0.4Rh / SiO2-900-10 catalyst did not deactivate at all.