论文部分内容阅读
由五局承建的国家重点建设工程宝珠寺水电站,首台发电机转子于国庆前夕安全吊装就位。1996年9月30日,正在紧张施工中的宝珠寺水电站建设工地一片节日气氛。18时40分,随着水电五局局长一声“开始起吊”的命令,直径9.5m、高3m、重560t的一号发电机转子,在两台起重量各为300t的天车联合作业下,缓缓离开地面,向一号机坑方向徐徐前进。 8分钟后,在起重工、天车司机的精心操作和密切配合下,发电机转子开始在仅有2.0cm的间隙里平稳准确地下落。19时18分,一号机转子终于安全地落在了风闸上。
The national key construction project contracted by Wuhu Bureau, Baozhusi Hydropower Station, the first generator rotor was put in place safely on the eve of the National Day. September 30, 1996, is under intense construction of the construction site Baozhusi a holiday atmosphere. At 18:40, with the order of “Secretary of State for Hydropower,” “Start Lifting,” No. 1 generator rotor with a diameter of 9.5m, a height of 3m and a weight of 560t was jointly operated by two overhead traveling cranes of 300t each Under the slowly leaving the ground, the direction of a machine pit slowly moving forward. After eight minutes, with the careful operation and close cooperation of the crane and overhead crane drivers, the generator rotor began to fall smoothly and accurately in a gap of only 2.0 cm. At 19:18, the # 1 rotor finally safely landed on the damper.