论文部分内容阅读
The topside floatover installation is always a great challenge and is sensitive to environmental conditions. In this study, experimental analysis on the mating operation of the floatover installation in different wave headings is presented. The continuous mating operation using the rapid transfer technique was experimentally simulated with the assistance of the jacking system and the ballast system. In the continuous transfer modeling, the topsides loads were transferred onto the jacket by several consecutive steps, including the first rapid jack-down for the 30％ loads, continuous 30％-70％ load transfer and the second repaid jack-down for the remaining 30％ loads. Motions of the barge and the topsides as well as loads on the Deck Support Unite (DSU) and the Leg Mating Unite (LMU) in different wave headings were measured. Experimental results illustrated the complex motion behavior and load characteristics of the continuous transfer operation. Results indicate that the rapid jack-down operations will lead to impact loads and larger lateral DSU loads. The bow quartering seas are much more dangerous as it gives rise to the larger motions and loads. Comparisons with the traditional steady-state modeling indicate that the continuous transfer modeling has greater advantages over the steady-state modeling on predicting the loads.