论文部分内容阅读
用浇注法制成各种规格的饰面砖(厚1～3.5毫米,20×20毫米到150×150毫米见方),比用一般方法生产的瓷砖,成本低25～40%,投资和生产面积少2/3～3/4.小型的可粘于纸上作马赛克地板.其生产过程如下: 首先将原料制成泥浆,送入浇注传送装置上的搅拌机内.傅送装置有三个类似上釉机的浇注机组(图1).饰面砖的浇注在多孔陶瓷模板上进行,模板在传送装置上不断移动,在相应机组的浇注口下按顺序经过.
A variety of decorative tiles (thickness 1-3.5 mm, 20 x 20 mm to 150 x 150 mm square) are made by pouring method, which is 25-40% lower than the ceramic tiles produced by the general method, and the investment and production area are small. /3～3/4. Small size can be glued to paper for mosaic floor. The production process is as follows: First, the raw material is made into slurry and fed into the mixer on the pouring conveyor. The Fu delivery device has three similar glazing machines. Casting unit (figure 1). The casting of the facing bricks is carried out on a porous ceramic formwork. The formwork is constantly moved on the conveyor and passed in sequence under the pouring spout of the respective unit.