【摘 要】
：
In view of the recent technological development, the pursuit of safe high-precision structural designs has been the goal of most structural designers. To bridge
【机 构】
：
Department of Landscape Design and Management,Department of Fire Science,Department of Construction
论文部分内容阅读
In view of the recent technological development, the pursuit of safe high-precision structural designs has been the goal of most structural designers. To bridge the gap between the construction theories and the actual construction techniques, safety factors are adopted for designing the strength loading of structural members. If safety factors are too conservative, the extra building materials necessary will result in high construction cost. Thus, there has been a tendency in the construction field to derive a precise buckling load analysis model of member in order to establish accurate safety factors. A numerical analysis model, using modal analysis to acquire the dynamic function calculated by dynamic parameter to get the buckling load of member, is proposed in this paper. The fixed and simple supports around the circular plate are analyzed by this proposed method. And then, the Monte Carlo method and the normal distribution method are used for random sampling and measuring errors of numerical simulation respectively. The analysis results indicated that this proposed method only needs to apply modal parameters of 7×7 test points to obtain a theoretical value of buckling load. Moreover, the analysis method of inequality-distant test points produces better analysis results than the other methods.
其他文献
The droplet size distribution with large-holed compound sieve tray operating in the spray regime is measured by using a double electrical probes technique in a
A series of transparent casting polyurethane resins (TCPU) were synthesized from cycloaliphatic diisocyanate (IPDI or H12MDI), polyol, chain extender, crosslink
The density of liquid Ni-Ta alloys was measured by using a modified sessile drop method. It is found that the density of the liquid Ni-Ta alloys decreases with
Hot compression was conducted at a Thermecmaster-Z simulator, at deformation temperatures of 800～1040℃, with strain rates of 0.001～50 s-1 and height reduction of
Ingot metallurgy (IM) aluminum has long been the subject and attracted the attention of many metallurgists and textural researchers of materials. Due to the int
After purified by mixture of sulfuric acid and nitric acid, the multi-walled carbon nanotubes(MWNTs)were modified with stearic acid(SA). The modified carbon nan
建立了测定药品硝酸硫胺中含有的中国药典规定的前3类有机溶剂含量的方法,以确定它们在药物中的残留量和比例.实验方法采用毛细管气相色谱法,首先采用GC-MS对样品进行扫描定
党的十七大报告中提出：统筹城乡发展，推进社会主义新农村建设，要培育有文化、懂技术，会经营的新型农民，发挥亿万农民建设新农村的主体作用。那么，怎样才能保证农民培训有序进行？如何
在地质勘查中，地质勘察技术是一个非常重要的组成部分，只有利用科学、合理的找矿手段，才能使地质勘查工作得到不断的发展，并能够形成可循环的发展链条，只有通过找矿技术才能够找到
本文根据兵团1990～2011年的年度数据,运用约翰森协整检验分析以及Granger检验,对兵团金融发展与经济增长的影响进行实证研究.实证结果表明,兵团金融发展与经济增长之间存在长