论文部分内容阅读
为了提高电子设备的适应性,经常需要对电子设备进行气候环境的空调控制。目前国产的电子设备车专用空调器制冷量为3000大卡/小时,其中有两种类型,KFL1.5/3和KQL1.5/3B型。均为整体式,供电为3相,50赫芝,380伏,重量为120公斤以上。这两种空调器电源单一,安装型式不机动,占用空间及重量较大。特别是选用载重量为一吨的NJ221—13型军用越野汽车时,上述问题尤为突出。也有一些移动设备选用窗式空词器,由于一般的窗式空调器用于电子装备车须另加较好的减震措施,同时其安装型式必须有较大部份装于车体之外,在车上只有置于车头和车尾两个方向上,因此平面布置时与电子设备矛盾较大。另外一
In order to improve the adaptability of electronic equipment, it is often necessary to control the climate of the electronic equipment in air conditioners. The current domestic electronic equipment car air conditioner cooling capacity of 3000 kcal / hour, of which there are two types, KFL1.5 / 3 and KQL1.5 / 3B type. All are monolithic, power supply for the 3-phase, 50 Hertz, 380 V, weight of 120 kg or more. Both air conditioner power a single, installation type is not moving, taking up space and weight. In particular, the choice of a ton of load NJ221-13 military off-road vehicles, the above problems are particularly prominent. There are also some mobile devices use window-type air word device, as the general air conditioner for window air-conditioners for electronic equipment should be better damping measures, while its installation must have a larger part of the body mounted on the outside, in the The car is only placed in the front and rear of the two directions, so the layout of the larger conflicts with the electronic equipment. Another one