论文部分内容阅读
二、加工参数的选择在阴极周长面积比和气液混合器已定的条件下,合理地选择加工参数,是保证加工精度和加工速度的主要手段。本章的主要内容是在前述前提下,讨论主要加工参数对加工间隙和加工速度的影响规律,以及加工前如何根据阴极、电源、水泵、气源的具体条件来选择气液混合比和进给速度。
Second, the choice of processing parameters In the cathode than the area ratio and the gas-liquid mixer has been set under the conditions of a reasonable choice of processing parameters is to ensure that the processing accuracy and processing speed of the main means. The main content of this chapter is to discuss the influence of the main processing parameters on the processing gap and the processing speed under the above premise and how to select the gas-liquid mixing ratio and the feeding speed according to the specific conditions of the cathode, power supply, water pump and gas source before processing .