论文部分内容阅读
为了实现新干线和既有线路之间的直达旅客运输,日本铁道技术研究所正在研究客运集装箱。目前,由于新干线与既有线路的轨距不同,不能实现直达客运。以往解决不同轨距间的转载运输有三种方式:①更换转向架;②采用特殊结构的车轮或转向架,改变车轮内侧距;③采用3条或4条钢轨。而这些方式均不同程度地存在一些问题,如花费时间、增加地面设施等。为此,研究了客
In order to achieve direct passenger transport between the Shinkansen and the existing routes, the Japan Railway Technology Research Institute is studying passenger containers. At present, direct passenger transport can not be achieved due to different gauge distances between the Shinkansen and existing lines. In the past, there were three ways to solve the problem of reprinting and transporting between different gauge distances: ① replacing the bogie; ② adopting special structure of the wheel or bogie to change the inner distance of the wheel; ③ adopting 3 or 4 rails. However, there are some problems with these methods to different degrees, such as spending time and increasing ground facilities. To this end, studied the customer