点火线圈外壳的压紧和卷边用半自动机

• 作 者: 金慧珠
• 出 处: 汽车电器
• 发表日期: 1964年01期
• 关键词: 自动机 外壳 卷边 点火线圈 夹具 固定器 工作位置 工作台 气压 定位器

图1所示是半自动机总图。 装配后的点火綫圈被放汇在装有可拆卸定位器的夹具上(图3)。有六只这样的定位夹具且均匀地分布在在自动机的工作台上(图1A—A剖面)。 在自动机工作位置内,产品位于气压闵的连杆下面(图1),端盖和外壳的压紧夹具(图4)以及可拆卸固定器的动杆

Figure 1 shows the overall semi-automatic machine. The assembled ignition coil is dispensed onto a fixture with a detachable retainer (Figure 3). There are six such positioning fixtures and are evenly distributed on the work bench of the automaton (section of Figure 1A-A). In the working position of the automatic machine, the product is located under the connecting rod with air pressure Min (Fig. 1), the clamping fixture of the cover and the shell (Fig. 4) and the movable rod of the detachable holder