论文部分内容阅读
1.进入维修模式方法按电视机控制面板上的“音量减”键不放,使音量变为最小后,再同时按用户遥控器的“屏显”键,电视机屏幕右上角出现“S”字符时,表明机器进入S维修模式。进入S维修模式后,按遥控器“屏显”键退出S模式,然后再同时按电视机的“音量减”键和遥控器上的“屏显”键,即可进入D维修模式。若使用工厂调试专用遥控器,则按遥控器上的D—MODE(D模式)键,电视机屏幕上显示“D”字符和“RCUT”调整项目时,即可进入D维修模式。 2.退出维修模式方法表1 厦华XT—3465T彩电I~2C总线数据
1. Enter the maintenance mode method Press the “volume reduction” button on the TV control panel, the volume becomes the minimum, then press the “remote control” “screen display” key, the upper right corner of the TV screen When the “S” character appears, it indicates that the machine is in S maintenance mode. Into the S maintenance mode, press the remote control “screen display ” button to exit S mode, and then at the same time by the TV “volume reduction ” button and the remote control “screen ” button, you can enter D maintenance mode. If you use the factory-specific remote control, press the D-MODE button on the remote control to display the “D” character and the “RCUT” adjustment item on the TV screen to enter the D-service mode . 2. Exit maintenance mode method Table 1 XORA XT-3465T color TV I ~ 2C bus data