The Properties of the Carbonated Brick Made of Steel Slag-slaked Lime Mixture

来源 :武汉理工大学学报(材料科学版)(英文版) | 被引量 : 0次 | 上传用户:eidolonfish
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The properties of the carbonated brick made of steel slag-slaked lime mixture such as strength, drying shrinkage, water absorption and soundness were mainly investigated. The experimental results indicate that, after carbonation, the strength of the brick increases, its drying shrinkage reduces, and its soundness becomes eligible. The optimal slaked lime/steel slag (SL/SS) ratio for the carbonated brick is 0.2 and the as-prepared brick meets the requirements of the Chinese standard for MU20-grade building bricks, additionally, it also demonstrates prominent environmental benefits. The XRD and pore structure analyses indicate that the excellent properties of this carbonated brick are attributed to the formation of carbonate crystals and the dense structure due to the carbonation.
其他文献
Ba0.65Sr0.35TiO3 (BST) nanocrystals doped with different concentrations of Er3+ ion were fabricated using sol-gel method. The structure and morphology of these BST nanocrystals were studied using X-ray diffraction (XRD), field emission scanning electron m
The feasibility of using coral reef sand (CRS) in Portland cement concrete is investigated by testing the mechanical property and microstructure of concrete. The composition, structure and properties of the CRS are analyzed. Mechanical properties and micr
Ti6Al4V substrates were anodized in a 0.5 mol/L H2SO4 solution at applied voltages of 90-140 V. A hydroxyapatite-titanium oxide (HA-TiO2) coating was then deposited on the anodized Ti6Al4V substrates via a hydrothermal-electrochemical method at a constant
Fe3O4-octadecyltrichlorosilane (Fe3O4-OTS) was synthesized and used to remove dyes in a competitive system. Fe3O4-OTS was prepared by slow hydrolysis of OTS in cyclohexane on the surface of Fe3O4 obtained through coprecipitation method. Scanning electron
We developed poly lactic-co-glycolic acid (PLGA) microspheres loaded with cefquinome and tested their effectiveness in a mouse model.The microspheres were prepared by optimizing several key parameters such as PLGA molecular weight,drug/polymer ratio,inter
We analyzed the influence of sodium polyphosphate (STPP) on the performances of recycled gypsum (RG). This analysis was performed with two different ways of STPP addition: One was that the STPP was added into Plaster of Paris (POP), then recycled plaster
By means of29Si and27Al magic angle spinning nuclear magnetic resonance (MAS NMR) combined with deconvolution technique, X-ray diffraction (XRD), scanning electron microscopy (SEM) as well as energy dispersive X-ray system(EDX), the effect of 5 wt% corros
We developed a ifxation method and evaluate bone regrowth in the cavities of af4 mm× 8 mm titanium (Ti) tube through porous hydroxyapatite (HAP)/β-tricalcium phosphate (β-TCP) composite filling (group A), chitosan/calcium phosphate composite filling (grou