【摘 要】
:
Microsegregation formed during solidification is of great importance to material properties.The conventional Lever rule and Scheil equation are widely used to p
【机 构】
:
Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of
论文部分内容阅读
Microsegregation formed during solidification is of great importance to material properties.The conventional Lever rule and Scheil equation are widely used to predict solute segregation.However,these models always fail to predict the exact solute concentration at a high solid fraction because of theoretical assumptions.Here,the dynamics of microsegregation during polycrystalline solidification of refined Al-Cu alloy is studied via two-and three-dimensional quantitative phase-field simulations.Simulations with different grain refinement level,cooling rate,and solid diffusion coefficient demonstrate that solute segregation at the end of solidification (i.e.when the solid fraction is close to unit) is not strongly correlated to the grain morphology and back diffusion.These independences are in accordance with the Scheil equation which only relates to the solid fraction,but the model predicts a much higher liquid concentration than simulations.Accordingly,based on the quantitative phase-field simulations,a new analytical microsegregation model is derived.Unlike the Scheil equation or the Lever rule that respectively overestimates or underestimates the liquid concentration,the present model predicts the liquid concentration in a pretty good agreement with phase-field simulations,particularly at the late solidification stage.
其他文献
In this study,a magnetic high entropy alloy (HEA) of CoFeMn1.2NiGa0.8 was designed and prepared by arc melting in order to investigate its mechanical,corrosion
The single-phase face-centered cubic (fcc)-structured Fes0Mn27Ni10Cr1 3 high entropy alloy (HEA) exhibits good ductility but low strength,which presents a chall
Compared with the growing applications of peritectic alloys,none research on the fluid permeability K of dendritic network during peritectic solidification has
Additive manufacturing is a very promising manufacturing method widely used in various industries.In this study,for the first time,a new type of combined cable
The relationship among B content,microstructure evolution and stress rupture properties of K4750 alloy during long-term aging were investigated.After aging at 8
Acetone,as widely used reagents in industry and laboratories,are extremely harmful to the human.So the detection of acetone gas concentrations and leaks in spec
Perovskite oxides like SrTiO3 at the nanoscale are of interest for emerging applications,including high-k dielectrics and sensors.However,their synthesis requir
The laminate structure was applied to improve the mechanical properties of Mg-8.0Gd-3.0Y-0.5Zr alloys.Two types of laminate structures only with different distr
MgH2 is regarded as a potential hydrolysis material for the hydrogen generation due to its high theoretical hydrogen yield,abundant source on earth and environm
Here,we report a facile method to produce pure silver nanowires (AgNWs) with high yield.A highly conductive dispersant was used to ensure uniform dispersion of