论文部分内容阅读
我科全年成图任务大约70％是用分工法完成的,供立体量测仪描绘地貌用的是玻璃裱版片,每年需要数量较多。以前在制作裱版片中是用手摇砂输机,磨去玻璃片边缘锋利的棱角。劳动条件差,强度大,时间长。清洗玻璃片也是手工操作,比较费时。为了改善这种状况,我们设计制作了一台磨洗玻璃片的机器,(用于裱板片),将玻璃片倒角和清洗功能合于一部机器。两种工作可同时进行,也可分开进
About 70% of the annual mapping task of our department is accomplished by the division of labor method. The stereoscopic measuring instrument used for the depiction of landforms is a glass enamel plate, which requires a large quantity each year. In the past, in the production of the stencil sheet, the sander was shaken by hand, and the edges of the edge of the glass sheet were sharpened. Poor working conditions, strength, and long time. Cleaning glass sheets is also a manual operation, which is time consuming. In order to improve this situation, we designed and manufactured a machine that grinds the glass sheet (used for the slate sheet) and combined the chamfering and cleaning of the glass sheet on a single machine. Both jobs can be performed simultaneously or separately