【摘 要】
：
Synthesizing the mechanical models of the belt, the driver and the take-up device, the dynamics model was established on the longitudinal vibration of the overall belt conveyor system with finite elemental method, and S-function simulation block of asynch
【机 构】
：
Department of Mechanical Engineering, Huaihai Institute of Technology, Lianyungang 222005, China;Don
论文部分内容阅读
Synthesizing the mechanical models of the belt, the driver and the take-up device, the dynamics model was established on the longitudinal vibration of the overall belt conveyor system with finite elemental method, and S-function simulation block of asynchronous motor owing feedback function was built in Matlab/Simulink software, the simulation block indicates that motor rotation speed and its output moment vary with load and time, and the motor is a dynamic feedback system in working process. The state space block was adopted to express model of the belt. Thus it created simulation model of established dynamic model of overall belt conveyor system with Matlab/Simulink software, and simulates the course of starting by properly setting simulation parameters, and processes data for visualization.
其他文献
It is highly important to investigate relationship between coal characteristics and methane adsorption on coal in the fields of coalbed methane recovery. Based on data examination of coal quality indexes collected from the literatures, regression equation
This article was written according to the security information theory and the security cybernetics basic principle, for reducing the accident risk effectively and safeguarding the production safety in coal mine. First, each kind of risk characteristic has
The develop actuality and direction of FRP(fibre glass reinforced plastics) bolt in the world are analyzed. The new type structure of FRP bolt was designed. Trial data indicate that, all kinds of capability target of this FRP bolt all achieve and exceed t
In order to design a new technological process system to take the polymeric ferric aluminum silicate sulfate(PFASS) and to apply it in wastewater processing, the chemical composition analysis was carried on to the Fuxin gangue, adopted the orthogonal expe
The invertible of the Large Air Dense Medium Fluidized Bed (ADMFB) were studied by introducing the concept of the inverse system theory of nonlinear systems.Then the ADMFB, which was a multivariable, nonlinear and coupled strongly system,was decoupled int
Two Zn-based sorbents, L-991 and L-992 used for hot 9as desulfurization (HGD) were introduced. Zn/Ti ratio of the two sorbent was 1:1 and 2:3 resptively and a certain proportion of Cu and Mn metal oxide were added into L-992, which provided better perform
Summarized the four main sources of CO gas on the working face based oninvestigation and local observation: firstly, it analyzed the mechanism that CO gas wasproduced by spontaneous combustion and oxygenation of gob residual coal; next, it illus-trated th
According to the analysis of the mechanism of top coal caving, the caving condition was pointed out, and many factors of caving were also determined. Then the relationship between factors and caving was studied. Based on the above research, one effective
In this paper, FLUENT software was used to simulate the burning process in a utility boiler. Chose the kinetics/diffusion-limited as combustion model, two-compet-ingrates as devolatjlization model, RNG k-εmodel as viscous model, and PDF model as combustio
Waste print circuit board containing 11.38% Br was pyrolyzed in vacuum.Thermal stability of waste print circuit board was studied under vacuum condition by thermo-gravimetry(TG). Vacuum pyrolysis of WPCB was studied emphasizing on the kinetics of WPCB pyr