论文部分内容阅读
The low laser induced damage threshold of the KH2PO4 crystal seriously restricts the output power of inertial confinement fusion.The micro-waviness on the KH2PO4 surface processed by single point diamond turning has a significant influence on the damage threshold.In this paper,the influence of micro-waviness on the damage threshold of the KH2PO4 crystal and the chief sources introducing the micro-waviness are analysed based on the combination of the Fourier modal theory and the power spectrum density method.Research results indicate that among the sub-wavinesses with different characteristic spatial frequencies there exists the most dangerous frequency which greatly reduces the damage threshold,although it may not occupy the largest proportion in the original surface.The experimental damage threshold is basically consistent with the theoretical calculation.For the processing parameters used,the leading frequency of micro-waviness which causes the damage threshold to decrease is between 350-1 μm-1 and 30-1 μm-1,especially between 90-1 μm-1 and 200-1 μm-1.Based on the classification study of the time frequencies of microwaviness,we find that the axial vibration of the spindle is the chief source introducing the micro-waviness,nearly all the leading frequencies are related to the practical spindle frequency(about 6.68 Hz,400 r/min) and a special middle frequency(between 1.029 Hz and 1.143 Hz).
The low laser induced damage threshold of the KH2PO4 crystal seriously restricts the output power of inertial confinement fusion. The micro-waviness on the KH2PO4 surface processed by single point diamond turning has a significant influence on the damage threshold. In this paper, the influence of micro-waviness on the damage threshold of the KH2PO4 crystal and the chief sources introducing the micro-waviness are analysed based on the combination of the Fourier modal theory and the power spectrum density method. Research result indicating that among the sub-wavinesses with different characteristic spatial frequencies there exists the most dangerous frequency which greatly reduces the damage threshold, although it may not occupy the largest proportion in the original surface. The experimental damage threshold is basically consistent with the theoretical calculation. For the processing parameters used, the leading frequency of micro-waviness which causes the damage threshold to decrease is between Based on the classification study of the time frequencies of microwaviness, we find that the axial vibration of the spindle is the chief source introducing the micro-waviness, nearly all the leading frequencies are related to the practical spindle frequency (about 6.68 Hz, 400 r / min) and a special middle frequency (between 1.029 Hz and 1.143 Hz).