论文部分内容阅读
A fuzzy model was presented to predict the weldment shape profile of submerged arc welds (SAW)including the shape of heat affected zone (HAZ).The SAW bead-on-plates were welded by following a full factorial design matrix.The design marx consisted of three levels of input welding process parameters.The welds were cross-sectioned and etched,and the zones were measured.A mapping technique was used to measure the various segments of the weld zones.These mapped zones were used to build a fuzzy logic model.The membership functions of the fuzzy model were chosen for the accurate prediction of the weld zone.The fuzzy model was further tested for a set of test case data.The weld zone predicted by the fuzzy logic model was compared with the experimentally obtained shape profiles and close agreement between the two was noted.The mapping technique developed for the weld zones and the fuzzy logic model can be used for on-line control of the SAW process.From the SAW fuzzy logic model an estimation of the fusion and HAZ can also be developed.