论文部分内容阅读
将■-5型半自动焊机的焊絲輸送机构上的軟管手把取下。另外装上一个焊丝导向咀,并在输送机构上再装上两对减速齿输与一只啮合齿輪,就可当自动焊机使用。改装后的傳动机构如圖所示。在原来的可换变速齿輪5的一个主动輪軸上,用螺絲帽再接上一根軸,并装上减速齿輪6。可換变速齿轮7除圖示的16齿外。尚有24、32、36等齿数不等的齿
Remove the hose handle from the wire delivery mechanism of the Model-5 Semi-Automatic Welder. Also fitted with a wire guide Tsui, and the delivery mechanism and then loaded on the two pairs of reduction gear transmission and a meshing gear, can be used as automatic welding machine. The modified transmission mechanism as shown. In the original changeable gear 5 a drive shaft, with a screw cap and then connected to a shaft, and mounted on the reduction gear 6. Changeable gear 7 except for the 16 teeth shown. There are 24,32,36 other teeth ranging from the number of teeth