Transformation Behavior and Mechanical Properties of Al2O3/ZrO2(2Y) Ceramic Composites

来源 :稀土学报(英文版) | 被引量 : 0次 | 上传用户:pzchh
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The content of zirconia has a remarkable influerce on transformation behavior and mechanical properties of Al2O3/ZrO2 (2Y) composites. When 15% and 20% ZrO2(2Y) was added to Al2O3, the bending strength and fracture of the content of ZrO2 (2Y) on transformation and mechanical properties was investigated. The changes of m-ZrO2 and t-ZrO2 phases content before and after fracture were measured by X-ray diffraction quantitative phase analysis, It is shown that improvement in bending strength and fracture toughness of the Al2O3/ ZrO2 (2Y) composites is due to the phase transformation toughening mechanism of ZrO2 (2Y) and thermal expansion mismatch.
其他文献
UHVCVD-grown Si/Si1- xGex/Si heterostructure was investigated by Photoreflectance spectroscopy (PR). The principle of PR used in semiconductor film was thorough
The ZrO2-CeO2-Al2O3 system has been assessed with the CALPHAD (Calculation of Phase Diagrams) technique using the PARROT procedure. The experimental information
Semi-solid AZ91D magnesium alloy was investigated in isothermal steady-state condition. The influence of stirring technological parameters such as stirring temp
The hydration and pore structure of sulphoaluminate MDF cement were studied by X-ray diffractometer ( XRD ), scanning electron microscope (SEM) and mercury intr
Glass forming ability (GFA) and structural characterization of a new amorphous Al-Ni-Sr alloy melt spun were investigated on the theory of the factors for the g
The low temperature ion sulphuration-an effective surface engineering technique for reducing friction and wear of rubbing-pairs was introduced. It involves the
CO2 laser quick assembly technology is adopted on the surface of cast aluminum ZL104 to form a dense ceramic coating containing a great deal of nanometer Al2O3/
Low-Co AB5-type Mm(NiCoMnA1)5Bx (x = 0, 0.1, 0.2 ) electrode alloys were prepared by casting and rapid quenching.The effects of the rapid quenching on the latti
A new concept of salt core, a melting temperature of which is lower than the solidus temperature of cast alloy,was introduced to produce an integrated casting p
In order to improve the in-flight characteristics of the atomizing droplets during high velocity wire arc spraying (HVAS), some changes have been operated on th