论文部分内容阅读
在对粉末烧结材料的试验过程中,自制了一台硅化钼高温加热炉,并将它装配到改装了的普通油压机上,配以专用模具工装,形成了一种复压装置。经验证,该装置工作稳定、造价低廉、试验简便易行。
一种粉末烧结材料的高温复压装置
【摘 要】
：
在对粉末烧结材料的试验过程中,自制了一台硅化钼高温加热炉,并将它装配到改装了的普通油压机上,配以专用模具工装,形成了一种复压装置。经验证,该装置工作稳定、造价低廉、
【机 构】
：
洛阳工学院,洛阳工学院
【出 处】
：
热加工工艺
【发表日期】
：
1990年2期
其他文献
A general analytic approach,namely the homotopy analysis method(HAM),is applied to solve the time independent Schrodinger equations.Unlike perturbation method,t
Iterative technique for circular thin plates on Gibson elastic foundation using modified Vlasov mode
In this paper, to investigate the influence of soil inhomogeneity on the bending of circular thinplates on elastic foundations, the static problem of circular t
Harmonic thermoelastic waves in helical strands with Maxwell–Cattaneo heat conduction areinvestigated analytically and numerically. The corresponding dispersio
In the above paper the entropy generation is defined as fol-lows (Eq. (25) in Ref. [1]) In Eq. (1) the parameter RD appears. However, the parameter RD is absent
Negative stiffness mechanisms have great application potential in different fields, such as vibration isolation, energy absorption and mesh antenna unfolding. A
Equation(1)in Ref.[1]with parameter RD is the standard governing equation for entropy generation of nanofluid flow over a stretching sheet via Buongiorno's
本文实验表明,采用瞬时高温分级淬火工艺能有效地抑制CuZnAlSMA的马氏体稳定化。用该工艺处理的试样具有长期、稳定、良好的SME和RSME,其A_s温度基本上不受室温时效时间之影
Crashworthiness assessment of thin-walled double bottom tanker: A variety of ship grounding incident
This study addresses the issue of ship accidental grounding as an impact phenomenon,with the assumption that an interaction of its structure with the oceanic se
本文对高韧性钛合金Corona5的淬火马氏体组织直接用于热变形进行了探讨,并与炉冷的魏氏组织进行了对比,通过金相观察形变与形变后热处理的显微组织,结果表明:魏氏组织不易通
本文给出了一种利用计算机进行铸钢齿轮(齿圈)胃口设计计算的方法,它既能计算出所设计冒口的全部参数,也能计算出铸件重量,工艺出品率,延续度等,同时又能把结果打印出来,这种