论文部分内容阅读
我厂熟料窑喂料和赤泥外排两个工序中,使用了三种规格的油隔离泥浆泵,共14台。该泵用单向阀来控制输送介质的吸入与排出,其单向阀的结构如图1。 密封圈原设计的剖面形状上下不对称,C面为平面,A面为斜面,如图1右侧所示。
I plant clinker kiln feed and red mud discharge two processes, the use of three sizes of oil isolation mud pump, a total of 14 units. The pump with a one-way valve to control the transmission of medium suction and discharge, the check valve structure shown in Figure 1. Seal the original design of the cross-sectional shape of the upper and lower asymmetry, C-plane, A-side slope, shown in Figure 1 on the right.