Process design for gas condensate desulfurization and synthesis of nano-13X zeolite adsorbent: equil

来源 :石油科学(英文版) | 被引量 : 0次 | 上传用户:myxiu
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
This paper summarizes the results of a study of adsorption of sulfur compounds from a high-sulfur feed on improved spherical-shaped nano-AgX zeolite.For this purpose,the nano-AgX zeolite was initially synthesized and improved with silver compounds such as silver nitrate,and then it was utilized in the adsorption process.In order to investigate the equilibrium and dynamics of the adsorption process,adsorptive desulfurization of real feed (i.e.,sour gas condensate from the South Pars gas field) was carried out in batch and continuous processes under several operating conditions;a temperature-dependent Langmuir isotherm model was used to fit the equilibrium data.The value of monolayer adsorption capacity (qm) and adsorption enthalpy (AH) were calculated to be 1.044 mmol/g and 16.8 kJ/mol,respectively.Furthermore,a detailed theoretical model was employed in order to model the breakthrough experiments.The results revealed that an increase in the feed flow rate and l/T values will cause linear and exponential increase in the total mass transfer coefficient (ks).Isotherm and dynamic breakthrough models were found to be in agreement with the experimental data.
其他文献
It is of real and direct significance for China to cope with oil price fluctuations and ensure oil security.This paper aims to quantitatively analyze the specific contribution ratios of the complex factors influencing international crude oil prices and to
In the pharmaceutical industry,fluidized beds are typically used for pellets drying,coating and granulation.The gas-solids flow characteristic in the process plays an important role to control the heat and mass transfer as well as the end-point product qu
Ensemble-based analyses are useful to compare equiprobable scenarios of the reservoir models.However,they require a large suite of reservoir models to cover high uncertainty in heterogeneous and complex reservoir models.For stable convergence in ensemble
Full tensor magnetic gradient measurements are available nowadays.These are essential for determining magnetization parameters in deep layers.Using full or partial tensor magnetic gradient measurements to determine the subsurface properties,e.g.,magnetic
Fluidization of non-spherical particles is very common in petroleum engineering.Understanding the complex phenomenon of non-spherical particle flow is of great significance.In this paper,coupled with two-fluid model,the drag coefficient correlation based
Drilling muds with less environmental impact are highly desired over conventional diesel-based mud systems,especially in light of the emerging strict environmental laws.In this article,a novel oil-in-water (O/W) emulsion drilling fluid formulated with a m
In this paper,the analysis of faults with different scales and orientations reveals that the distribution of fractures always develops toward a higher degree of similarity with faults,and a method for calculating the multiscale areal fracture density is p
The pressure-sensitive effect on the pore structure of sandstone was investigated using X-ray computed micro-tomography and QEMSCAN quantitative mineral analysis.In a physical simulation study,we extracted the pore network model from digital cores at diff
Tortuous hydraulic fractures (HFs) are likely to be created in heterogeneous formations such as conglomerates,which may cause sand plugging,ultimately resulting in poor stimulation efficiency.This study aims to explore HF growth behavior in conglomerate t
For a typical marine shale reservoir in the Jiaoshiba area,Sichuan Basin of China,P-impedance is sensitive for identifying lithology but not suitable for indicating good shale reservoirs.In comparison,density is an important quantity,which is sensitive fo