桥梁结构预应力度的规定

来源 :中南公路工程 | 被引量 : 0次 | 上传用户:junyuan__zhang
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
<正> 从多年来预应力混凝土结构的理论和实验研究(关于它们使用的可能性,可靠性和耐久性)中,可以得出结论,采用预应力作为确保结构达到预定性能的一项构造措施是合理的.
其他文献
<正> 1 前言 要使填土稳定,最常用方法之一是利用压实机具将土壤分层压实。在一定的工程条件下,选择最合理的压实机具是建筑和公路工程师在公路和其它土方工程中所面临的突出
介绍MT5022型(移动式)核子密度含水量测定仪的研制,这是一种移动式的对公路路基与路面结构层进行连续的压实度的检测与控制,它可装在压路机和手推车或其它交通工具上工作,它
刚槊拱桥上部结构的优越性是显而易见的,但它的基础却比一般梁桥工程量大。如何使刚架拱桥的下部结构接近同跨径的梁桥,为此,在使用刚架拱上部结构定型图的基础上,首先把上、
The nucleation of ordered phase was simulated based on microscopic diffusion equation and the assumptions of the classical nucleation theory were examined. The
In order to use stainless steel as bipolar plate for PEMFC, electrochemical behavior of a high Cr and Ni austenitic stainless steel was studied in the solutions
<正> 1 概述 宜城汉江公路大桥全长1887m,从经济性、通航、施工等多方面对比设计计算,主桥设计为55+4&#215;100+55m的连续梁,主桥以东设置全长1250m的25孔50m预应力简支T梁。
This paper deals with the structure of the Y^Ⅲ complex with aminopolycarboxylic acids, synthesis and structural determination of the complex (NH4)[YⅢ(edta)(H2
Five Kinds of WSi2/MoSi2 composites were successfully prepared by mechanical alloying,IP and high temperature sintering techniques.And their hardness and fractu
洛溪大桥全长1916.04m、主桥上部结构为预应力混凝土连续刚构,基础为φ1.5m钻孔灌注桩,矩形断面薄壁空心墩。该桥具有桥高、跨大、结构混凝土标号高等特点。为全面了解该桥混
At present CALPHAD (CALculation of PHAse Diagram) technique is not capable of predicting whether there exists intermediate compound, much less predicting the f