论文部分内容阅读
安装声卡的目的是让机器发出动听的声音。可是,却经常碰到声卡不能发声或声音不正常的现象,如何排除声卡故障,使其发出优美动听的声音呢? 故障现象一:声卡无法“即插即用” 原因及排除:1、检查声卡跳线是否正确。例如,一块联讯OPTI931声卡,说明书上没有的隐含跳线JP3,短路即为PnP,开路时Win95认不出声卡,但出厂时默认为开路。 2、如果你的声卡号称PnP,但Win95就是不认怎么办?像以前很难安装的007声卡,解决方法很简单:假设安装前操作系统是DOS,先安装DOS下的声卡驱动再进行Win95的安装,在安装中间提示“本机即插即用设备”时选择“声卡”即可。实在不行的话,在Autoexec.bat中添加一句“set blaster=a220 i5 d1 h5 t6”也行;这一招若还是不灵,索性再重新安装Win3.1,安装好Win3.1下的驱动程序后再进行升级安装,Win95多半就会认出声卡了。
The purpose of installing a sound card is to make the machine make a nice sound. However, they often encounter the sound card can not sound or abnormal sound phenomenon, how to troubleshoot the sound card to make it beautiful sound? Trouble phenomenon: the sound card can not “plug and play” Reasons: 1, check the sound card Jumper is correct. For example, a piece of interconnection OPTI931 sound card, there is no hidden jumper JP3 in the manual, the short circuit is PnP, Win95 can not recognize the sound card in the open circuit, but by default the factory is open circuit. 2, if your sound card is known as PnP, but Win95 is not recognize how to do? As previously difficult to install 007 sound card, the solution is simple: Suppose the operating system before installation is DOS, install DOS sound card driver and then Win95 Install, in the installation of the middle prompted “native Plug and Play device” to select “sound card”. It is not enough, add a line in the Autoexec.bat “set blaster = a220 i5 d1 h5 t6” is also OK; if this trick or not working, simply reinstall Win3.1, install the driver under Win3.1 Then upgrade the installation, Win95 will recognize the sound card most of the time.