论文部分内容阅读
车床连续生产,灯线经常被切屑割断(蛇皮管软配线),占机床故障率70％,这样既影响了生产,又浪费原材料。为此,我们把原机床灯线改进为“铁管滑动式”走线。经三年多应用效果很好,受操作者欢迎。铁管滑动式走线是根据机床刀架进、退距离来确定动、静两管的长度尺寸。两管的粗细可根据具体情况选用,最好选用定管ф16mm,动管ф14mm。当刀架进刀时,动管被刀架拖板带动至B处,刀架后退时动管到A处。动管
Lathe continuous production, the lights are often cut off the chip (snake skin hose wiring), accounting for machine failure rate of 70%, thus affecting both the production, but also a waste of raw materials. To this end, we improve the original machine tool light line “iron pipe sliding” alignment. After three years the application effect is very good, welcomed by the operator. Iron pipe sliding alignment is based on the machine tool turret into the retreat distance to determine the length of the dynamic and static pipe size. The thickness of two tubes can be selected according to the specific circumstances, the best choice of fixed tube ф16mm, tube ф14mm. When the tool holder enters the knife, the movable tube is driven to the B position by the tool holder carriage, and the tube moves to A when the tool holder retracts. Move tube