论文部分内容阅读
Rapid solidification of Cu-Pb monotectic alloys has been accomplished during free fall in a 3 m drop tube. Both macrosegregated and uniformly dispersed structures are observed in Cu-40 wt pct Pb alloy droplets, whereas droplets of composition Cu-64 wt pct Pb exhibit only macrosegregation morphologies. The microstructures are strongly dependent on droplet size. The higher undercooling tends to facilitate liquid phase separation and results in more extensive macrosegregation in smaller droplets. There exists a pronounced tendency for the Pb-rich liquid to occupy the surface of the droplets of both compositions, resulting from the quite lower surface tension of the Pb-rich phase and causing a Pb-rich layer at the surface of the solidified droplet. The nucleation of monotectic cells in the Cu-40 wt pct Pb droplets with dispersed structures preferentially occurs at the droplet surface. A single nucleation event takes place more frequently as droplet size is reduced.
Rapid solidification of Cu-Pb monotectic alloys has been accomplished during free fall in a 3 m drop tube. Both macrosegregated and dispersed structures are observed in Cu-40 wt pct Pb alloy droplets, droplets of composition Cu-64 wt pct Pb exhibit The microstructures are strongly dependent on droplet size. The higher undercooling tends to facilitate liquid phase separation and results in more extensive macrosegregation in smaller droplets. There exists a pronounced tendency for the Pb-rich liquid to occupy the surface of the droplets of both compositions, resulting from the quite lower surface tension of the Pb-rich phase and causing a Pb-rich layer at the surface of the solidified droplet. The nucleation of monotectic cells in the Cu-40 wt pct Pb droplets with dispersed structures preferentially occurs at the droplet surface. A single nucleation event takes place more frequently as droplet size is reduced.