【摘 要】
：
The influence of aging treatment on transformation behavior and shape memory of the Ti50-xNi48Fe2Nbx(x=0,0.6,0.8,1.0,and 1.2)alloys was investigated using diffe
【机 构】
：
School of Materials Science and Engineering
【基金项目】
：
This project was financially supported by the National Natural Science Foundation of China
论文部分内容阅读
The influence of aging treatment on transformation behavior and shape memory of the Ti50-xNi48Fe2Nbx(x=0,0.6,0.8,1.0,and 1.2)alloys was investigated using differential scanning calorimeter(DSC),mechanical drawing machine,and microhardness tester in this paper.It is indicated that the aging treatment has a significant effect on the phase transformation temperatures(Ms,Mf,Mp,As,Af,and Ap)and microhardness of the samples.The phase transformation temperatures are found to decrease initially with the increasing aging temperature from 300 to 500 ℃ and increase with further increase of the aging temperature.The aging treatment at intermediate temperature between 400 and 500 ℃ results in an improved shape memory effect.In addition,the highest microhardness value is also obtained.
其他文献
The corrosion behaviours of four kinds of rolled magnesium alloys of AZ31, AZ91, AM60 and ZK60 were studied in 1 mol/L sodium chloride solution. The results of
Based on the research on rock burst phenomenon induced by the breakage of thick and hard roof around roadways and working faces in coal mines,a criterion of roc
For infrared focal plane array sensors,imagery is degraded during signal acquisition,particularly nonuniformity. In this paper,an adaptive nonuniformity correct
A newly developed heuristic global optimization algorithm,called gravitational search algorithm (GSA),was introduced and applied for simultaneously coordinated
为探究吕家坨井田地质构造格局,根据钻孔勘探资料,采用分形理论和趋势面分析方法,研究了井田7
This paper experimentally studies the tensile deformation behavior of polycarbonate (PC),acrylonitrile-butadiene-styrene (ABS),and PC/ABS blends (with the blend
In order to enhance the corrosion resistance of 304 stainless steel,niobium was electrodeposited on its surface in air- and water-stable ionic liquids.The elect
A high Nb containing TiAl alloy was prepared from the pre-alloyed powder of Ti-45Al-8.5Nb-0.2B-0.2W-0.02Y (at％) by spark plasma sintering (SPS).Its high-temperat
Bulk Mn1.2Fe0.8P0.76Ge 0.24 alloy was prepared by mechanical milling and subsequent spark plasma sintering technique.Effect of annealing on the structure and ma
The hot deformation characteristics of as-cast nickel-base superalloy GH742y after hot isostatic pressing (HIP)(hereafter referred to as-cast alloy) have been i