论文部分内容阅读
To determine mirror surface finishing conditions and efficient and economical superfinishing conditions for pure titanium and titanium alloys,an abrasive film is used when superfinishing is performed under varying conditions.These conditions include the workpiece rotation speed,the oscillation speed,the contact pressure of the roller,the hardness of the roller,and the type of abrasive film.The superfinishing device is applied to polishing a thin and long cylindrical bar.A micro-finishing film and a lapping film were used as abrasive films.Al2O3 grains or SiC grains were used as abrasives.The surface roughness of a polished workpiece was measured using a stylus-type surface-roughness measuring instrument.As a result,the conditions to improve the polishing surface efficiently include high values for the workpiece rotation speed,oscillation speed and contact pressure.The roller hardness has no effect on the efficient polishing conditions.The mirror finish of a surface can be created using lapping film of 3 μm with Al2O3 grains after polishing to a steady surface roughness under the efficient polishing conditions.
To determine mirror surface finishing conditions and efficient and economical superfinishing conditions for pure titanium and titanium alloys, an abrasive film is used when superfinishing is performed under varying conditions. These conditions include the workpiece rotation speed, the oscillation speed, the contact pressure of the roller , the hardness of the roller, and the type of abrasive film. superfinishing device is applied to polishing a thin and long cylindrical bar. A micro-finishing film and a lapping film were used as abrasive films. as abrasive. The surface roughness of a polished workpiece was measured using a stylus-type surface-roughness measuring instrument. As a result, the conditions to improve the polishing surface efficiently include high values for the workpiece rotation speed, oscillation speed and contact pressure. The roller hardness has no effect on the efficient polishing conditions. The mirror finish of a surface can be created using lapping film of 3 μm with Al2O3 grains after polishing to a steady surface roughness under the efficient polishing conditions.