快速晾干瓦坯加速术托周转小窍门

• 作 者: 戴树
• 机 构: 江西省赣州市赣南新生砖瓦厂,
• 出 处: 建筑材料工业
• 发表日期: 1960年21期
• 关键词: 瓦坯 增产节约运动 瓦托 把带 窍门 平瓦 机平 下木 道立 日产

为了缩短机平瓦湿瓦坯的干燥期,提早下木托,以加快瓦托的周转,节约瓦托耗用的木材,我厂在增产节约运动中,把带木托的平瓦湿瓦坯由过去在坯棚荫干改在露天坯场上晾干.其具体作法是把带木托的湿瓦坯直立在坯场的晒足上,两侧用草帘稍加遮盖.这样晾晒,湿瓦坯经过1天多的时间就可以下瓦托,而且还减少了干燥损失,由过去的12%降低至7%.

In order to shorten the drying period of the wet tile blank of the plane tile, the wooden tray is lowered earlier to speed up the turnover of Watto and to save the timber consumed by Watto. From the past in the shade dry shade changed in the open billet to dry. Its specific approach is to put the wet tray with wooden support upright on the drying feet in the billet, both sides covered with a straw screen, so that drying, wet After a little more than 1 day, the billet can be lowered, and the loss of drying is also reduced, from the previous 12% to 7%.