论文部分内容阅读
台肥鋼铁厂参加了三月末在上海召开的全国转爐炼鋼会议后,组织了会议的四个主要技术文件的讨论,一致認为这些文件及兄弟厂的先进經驗对車間当前存在爐衬寿命低,炼鋼操作不稳定以及出鋼溫度不高等薄弱环节的改进与提高指出了方向。只要認真貫彻操作要点各項基本要求,生产就会基本好转。通过各工段主要生产工人与車間技术人員共同研究,决定立即在爐衬工段加强貫彻簿层重打,去除瀝青水分,认真执行配料制度,减少砖縫,使用瀝青镁砂风眼砖,以及快速升温多烘风眼等措施。爐前操作貫彻縮短爐与爐的間隔时间、勤搖少动以掌握面吹操作,出鋼时挡好出鋼渣,改进胶氧剂
After participating in the national converter steelmaking meeting held in Shanghai in late March, Taiwan Fertilizer Iron & Steel Co., Ltd. discussed the discussion of the four major technical documents of the meeting and agreed that the advanced experience of these documents and the brothers’ factory present the existence of lining life in the workshop Low, steelmaking instability and tapping temperature is not high, the improvement and improvement of the weak points pointed out the direction. As long as the basic requirements of operational points are conscientiously implemented, production will be basically improved. Through the joint study of the main production workers and workshop technicians in all sections, it was decided to immediately implement the bookblasting in the lining of the lining to remove bituminous water, implement the ingredient system conscientiously, reduce the cracks, use the asphalt magnesia eyelet brick, and quickly Heating more blown eye and other measures. Pre-furnace operation and implementation to shorten the furnace and furnace interval, diligently to grasp the surface blowing operation, tapping a good steel slag tapping, to improve the oxygenated