张家港“科技兴市”的启示和思考

来源 :江苏科技信息 | 被引量 : 0次 | 上传用户:guyehanxing
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
启示之一,实施“科技兴市”战略,必须进一步加深对大科技概念的理解。实施科技兴市战略,必须确立大科技推进大经济的指导思想。张家港的实践充分说明这一点。 1.大科技必须围绕大经济。大科技的“大”不是与经济工作比大小的“大”。没有游离于经济工作之外的、独立的所谓大科技。大科技通过全面渗透、介入经济建设、社会发展的各个 One of the enlightenments is that we must further deepen our understanding of the concept of big science and technology by implementing the strategy of “promoting science and technology through science and technology.” To implement the strategy of rejuvenating the city through science and technology, we must establish the guiding ideology of promoting large economy through science and technology. Zhangjiagang’s practice fully illustrates this point. Big technology must focus on the big economy. Big tech’s “big” is not “big” with the size of the economy. There is no independent, so-called big technology free from economic work. Large-scale technology has been involved in all aspects of economic construction and social development through its full penetration
其他文献
Networks-on-chip (NoC) is a promising communication architecture for next generation SoC. The size of buffer used in on-chip routers impacts the silicon area an
思想政治工作是我们党建设与发展中的重要内容,为社会改革和发展指明了方向。事业单位若想要更好的适应时代发展需求,应当充分做好思想政治工作。针对当前事业单位思想政治工
近年来,由于盐碱灾害使混凝土构件出现早期老化。其中降低混凝土构件物耐用性的主要因素是由于磨损、结冰融解作用以及中性化和盐份浸透,使钢材腐蚀等加快。正是这些物理、
2009年2月22日,由高工在线主办的2009LED照明技术创新与应用论坛在深圳会展中心隆重举办。论坛就LED前沿技术趋势、应用前景、应用解 On February 22, 2009, 2009 LED light
Proton conducting composite membranes from sulfonated polyether ether ketone and SiO2 for direct methanol fuel cell (DMFC) application were prepared with sulfon
我一直认为中国私营经济带有资本主义性质,具有资本主义的那些基本特征。雇佣劳动、剩余价值的生产等私营经济中资本主义因素,可以说是一眼就看得出来的明显事实。但我们一
我厂一台70年代末引进的瑞士夏米尔公司D10电火花成型加工机床。在90年11月份,检修电磁阀后,当粗加工深度达2mm后,就总发生因积碳而引起的频繁烧弧短路,加工极难稳定,精加工
坐标测量机是FMS中质量保证的重要环节。将它集成于FMS有不少技术问题,为此1991年10月中国航空精密机械研究所请DEA公司的市场部经理Manganelli先生进行了3天专题座谈。本文
改革开放以来,临夏回族自治州经济建设和社会发展都有了长足进步,但是,也应该清醒地看到我们的生产力水平仍然很低下,科技教育事业落后,严酷的自然条件仍未得到大的改善,农
1前言 3Cr2W8V钢制螺栓热锻模工作时受力复杂,加上型腔与金属接触,温度高达600℃以上,这就要求锻模在高温时仍能保持较好的综合力学性能。又因锻模受周期性的加热和冷却的影