论文部分内容阅读
钢筋混凝土水池池壁厚度控制,一般采用两种方法:一是预制断面50毫米×50毫米左右、长度为池壁厚的混凝土块或砂浆块支撑模板,控制池壁厚度:一是用φ10毫米或φ12毫米钢筋加工成槽形,用扎丝固定在池壁钢筋的支撑模板上,控制池壁厚度。我单位在实践中,这两种方法都采用过,但效果均不理想。后来我们采用了预埋铁件支撑法,预埋铁件的形式见图1。施工时,将
In the control of the thickness of reinforced concrete pool walls, two methods are generally used: First, prefabricated sections of concrete about 50 mm by 50 mm in length and with a wall thickness of concrete blocks or mortar blocks to support the stencil, to control the thickness of the pool wall: First, use φ 10 mm or The φ12mm steel bar is processed into a trough shape, and is fixed on the supporting template of the steel reinforcement of the pool wall by a wire and controls the thickness of the pool wall. In practice, both of these methods have been adopted by our organization but the results are not satisfactory. Later, we adopted the embedded iron support method. The form of the embedded iron is shown in Figure 1. When construction, will