论文部分内容阅读
故障现象:装带不到位,此时可听到加载电机的转动声,过几秒钟后又自动卸载。分析与检修:打开上盖,装入录像带,带子进入一半时停止进带,此时加载电机正常运转,但加载传动镙杆及加载皮带不见转动,过几秒钟后又自动卸载。在装带时只要用手轻压一下带子就能装载到位,但自动放像时穿带导柱只能推至一半位置并自动停止,电源指示灯随之熄灭,此时再开启电源开关,电源指示灯有指示,穿带导柱又退回原位随之又自动卸载至一
Symptoms: loading is not in place, this time you can hear the rotation of the loading motor, after a few seconds and then automatically uninstall. Analysis and Overhaul: Open the cover, into the video tape, the tape into the halved into the belt, then load the motor normal operation, but the load transmission lever and the loading belt did not see the rotation, after a few seconds and then automatically uninstall. When loaded with a hand as long as the light pressure on the strap can be loaded in place, but when the automatic playback wearing guide pin can only be pushed to half the position and automatically stop the power indicator light goes out, then turn on the power switch, power indicator Lights have instructions, wear a guide post and returned to its original position and then automatically unloaded to one