论文部分内容阅读
为了避免在组合钢模板上打孔,我们在施工中应用了以下几种方法: 1.钢木模板组合法(用于螺栓拉杆支模):模板配板设计时,按施工荷载值计算确定螺栓拉杆总需用数量后,将其分成若干组,按照竖成列的排列方法把拉杆排布呈若干列,在拉杆位置使用木模板。即凡拉杆处在组合钢模之间夹50mm×50mm的木板
In order to avoid punching holes in the composite steel form, we applied the following methods in the construction: 1. Combination method of steel and wood formwork (for bolt and tie rods): In the design of the template plate, the bolts are calculated according to the calculation of construction load values. After the total number of tie rods is required, they are divided into several groups, and the tie rods are arranged in several rows according to the vertical arrangement, and a wooden formwork is used at the tie rod positions. In other words, every rod is sandwiched between 50mm x 50mm wooden planks