论文部分内容阅读
将ＤＯＳ内存驻留技术应用于实时测控系统中，较好地解决了实时测量与实时控制之间的矛盾．温度测量，采用高精度恒流源偏置下的铂电阻作为探测传感器．实验表明，铂电阻测温具有良好的线性及较强的抗电磁干扰的能力；但受其响应速度的限制，其测量值与实际值之间存在一定的滞后，分析表明，这一滞后效应，在激光器稳定运行时可以忽略，并可以将测量误差限制在１％以内．气体流速控制，采用微机控制高性能马达变频调速器实现对真空室中风机控制，进而达到调整气体流速的目的．此实时测控系统的研制，保证了激光器稳定、高效率的运行．
The DOS memory residency technology used in real-time measurement and control system, a better solution to the real-time measurement and real-time control of the conflict. Temperature measurement, using high-precision constant current source bias platinum resistance as a detection sensor. Experiments show that the platinum resistance temperature measurement has a good linearity and strong anti-electromagnetic interference ability; but its response speed limit, there is a certain lag between the measured value and the actual value, the analysis shows that this lag effect, It is negligible when the laser is operating stably and limits the measurement error to less than 1%. Gas flow control, the use of computer-controlled high-performance motor frequency converter to achieve the vacuum chamber fan control, and then to achieve the purpose of adjusting the gas flow rate. This real-time measurement and control system developed to ensure a stable and efficient laser operation.