论文部分内容阅读
用金刚石滚轮修整砂轮具有修整时间短,几秒钟就可完成,能完成仿形无法修整的复杂型面。滚轮精度保持性好,不仅能修整具有精度高和形状复杂型面,而且还可保证大批量生产零件质量的稳定性。因此,被广泛应用。金刚石滚轮修整时的运动如图1,即滚轮修整的参数是滚轮和砂轮在接触点的线速度之比V_r/V_s,砂轮每转滚轮的径向进给量d_2和光修转速r_s。影响滚轮修整的因素除上述修整参数外,滚轮粒度、修整装置的刚度,滚轮精度等对滚轮修整性能也有较大的影响。各种粒度的金刚石滚轮适用范围,滚轮粒度的
Dressing wheels with a diamond wheel has a short finishing time and can be completed in seconds, completing a complex profile that can not be trimmed. Good wheel holding accuracy, not only can be trimmed with high precision and complex shape of the surface, but also to ensure the stability of mass production parts quality. Therefore, it is widely used. Diamond wheel trimming movement shown in Figure 1, the wheel dressing parameters is the wheel and the wheel at the contact point of the linear velocity ratio V_r / V_s, the wheel per wheel radial feed rate d_2 and light repair speed r_s. Affect the wheel dressing factors In addition to the above dressing parameters, wheel size, dressing device stiffness, wheel accuracy, etc. also have a greater impact on wheel dressing performance. Various sizes of diamond wheel scope, wheel size