论文部分内容阅读
我厂电焊组组长杨寿明同志经过几次改进,制成一种粘结焊条的焊把,使焊条完全能用完。焊把的构造如图所示:1是利用普通废焊钳的胶木把;2是中碳钢螺杆;3是用低碳钢做的粘结体。在使用一定时间后,如粘结体表面焊渣堆集过多,只要在砂轮上将焊渣磨去又可继续使用。如果每次工作时将第一根焊条留5～7毫米长的焊条头,以后的焊条就粘结在达根焊条头上,就可延长粘结体的使用寿命。4是止头螺钉,防止在施焊中粘结体与螺杆发生松脱现象。
After several improvements, Comrade Yang Shouming, the leader of the welding group in our factory, made a kind of bonding electrode welding rod that can completely run out of welding rod. The structure of the welding rod as shown: 1 is the use of ordinary waste solder paste bakelite; 2 is a carbon steel screw; 3 is made of low carbon steel bonding body. After using for a certain period of time, such as excessive agglomeration of slag on the surface of the bonding body, grinding slag can be worn on the grinding wheel and can continue to be used. If each work will be the first electrode left 5 ~ 7 mm long electrode head, after the electrode is bonded to the root tip of the daggen, you can extend the life of the bond body. 4 is the end of the screw, to prevent sticking body and screw in the welding occurs loosening phenomenon.