Standard friction prediction model of long-distance hot oil pipelines

来源 :石油科学(英文版) | 被引量 : 0次 | 上传用户:yangleiyang
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
We developed a predictive model for the pipeline friction in the 520-730 m3/h transmission range using the multi-layerperceptron-back-propagation (MLP-BP) method and analyzing the unit friction data after the pigging of a hot oil pipeline.In view of the shortcomings of the MLP-BP model,two optimization methods,the genetic algorithm (GA) and mind evolutionary algorithm (MEA),were used to optimize the MLP-BP model.The research results were applied to the standard friction prediction of three sections of a hot oil pipeline.After the GA and MEA optimizations,the average errors of the three sections were 0.0041 MPa for the GA and 0.0012 MPa for the MEA,and the mean-square errors were 0.083 and 0.067,respectively.The MEA-BP model prediction results were characterized by high precision and small dispersion.The MEA-BP prediction model was applied to the analysis of the wax formation 60 and 90 days after pigging.The analysis results showed that the model can effectively guide pipe pigging and optimization.There was little sample data for the individual transmission and oil temperature steps because the model was based on actual production data modeling and analysis,which may have affected the accuracy and adaptability of the model.
其他文献
Sesquiterpanes are ubiquitous components of crude oils and ancient sediments.Liquid saturated hydrocarbons from simulated pyrolysis experiments on immature organic-rich mudstone collected from the Lower Cretaceous Hesigewula Sag were analyzed by gas chrom
Waterflood-assisted oil recovery with sulfate-spiked seawater would cause incompatibility scaling in carbonate reservoirs and reduce economic benefits.This research investigated the benefits of polyphosphate compounds in reducing scaling potential as well
Tight sands are abundant in nanopores leading to a high capillary pressure and normally a low fluid injectivity.As such,spontaneous imbibition might be an effective mechanism for improving oil recovery from tight sands after fracturing.The chemical agents
Nowadays,because of the reduction in oil resources and the passage of the first and second life period of current reservoirs,using enhanced oil recovery (EOR) methods is of great importance.In recent years,due to the developments in technology and the adv
Burial dissolution of feldspar and carbonate minerals has been proposed to generate large volumes of secondary pores in subsurface reservoirs.Secondary porosity due to feldspar dissolution is ubiquitous in buried sandstones;however,extensive burial dissol
The technology used to enhance coalbed methane (CBM) recovery by injecting CO2 (CO2-ECBM) with heat,combining heat injection with CO2 injection,is still in its infancy;therefore,theoretical studies of this CO2-ECBM technology should be perused.First,the c
Determining the rate of asphaltene particle growth is one of the main problems in modeling of asphaltene precipitation and deposition.In this paper,the kinetics of asphaltene aggregation under different precipitant concentrations have been studied.The ima
Fracability is a property that indicates how easy reservoir rocks can be fractured in hydraulic fracturing operations.It is a key parameter for fracturing design and evaluation.In order to utilize continuous logging data to predict fracability,synchronous
Modeling reservoir permeability is one of the crucial tasks in reservoir simulation studies.Traditionally,it is done by kriging-based methods.More rigorous modeling of the permeability results in more reliable outputs of the reservoir models.Recently,a ne
In this study,a sandstone interval of the lower Cretaceous successions in SW Iran is analyzed regarding the effects of late diagenesis on the alteration of primary reservoir quality and pore system.Petrological and geochemical analyses indicate dominant q