论文部分内容阅读
在维修带有电脑控制系统的汽车时,要注意以下事项,以免造成电脑或控制系统零部件的损坏。 1.不可在点火开关接通或发动机运转时拆卸或连接蓄电池电缆。 2.使用快速充电机进行就车充电时,务必拆下蓄电池搭铁线。不可用快速充电机进行辅助起动,以防止充电机的脉冲高电压损坏电子元件。 3.测试探针插入接头时注意不要损坏接头或针脚。要从接头后侧(连线一侧)插入探针,不要从针脚
When servicing a car with a computerized control system, the following precautions should be taken to avoid damage to the computer or control system components. 1. Do not disassemble or connect the battery cable while the ignition is on or while the engine is running. 2. When using the quick charger for car charging, be sure to remove the battery ground wire. Do not use a quick charger for auxiliary start to prevent charger high voltage damage to electronic components. 3. Be careful not to damage the connector or pins when the test probe is inserted into the connector. To insert the probe from the rear side of the connector (connection side), do not remove it from the stitch