论文部分内容阅读
A new potassium nitrate(KNO_3)/diatomite shape-stabilized composite phase change material(SSCPCM) was prepared by the mixing and sintering method. KNO_3 served as the phase change material(PCM) for thermal energy storage, while diatomite acted as the carrier matrix to provide the structural strength and prevent the leakage of PCM. It was found that KNO_3 could be retained 65 wt% into pores and on surfaces of diatomite without the leakage of melted KNO_3 from the SS-CPCM. The calculated filling rate of molten KNO_3 that could enter into the disc-like shape pore of diatomite verified the scanning electronic microscopy images of SS-CPCM. X-ray diffraction and Fourier transform infrared spectroscopy results showed that no reaction occurred between KNO_3 and diatomite, performing good compatibility. According to the differential scanning calorimetry results, after 50 thermal cycles, the phase change temperatures for melting and freezing of SS-CPCM with 65 wt% KNO_3 were changed from 330.23 °C and 332.90 °C to330.11 °C and 332.84 °C and corresponding latent heats varied from 60.52 J/g and 47.30 J/g to 54.64 J/g and 41.25 J/g, respectively. The KNO_3/diatomite SS-CPCM may be considered as a potential storage media in solar power plants for thermal energy storage.
A new potassium nitrate (KNO 3) / diatomite shape-stabilized composite phase change material (SSCPCM) was prepared by the mixing and sintering method. KNO 3 served as the phase change material (PCM) for thermal energy storage, while diatomite acted as the carrier matrix It was found that KNO_3 could be retained 65 wt% into pores and on surfaces of diatomite without the leakage of melted KNO_3 from the SS-CPCM. The calculated filling rate of molten KNO_3 that could enter into the disc-like shape pore of diatomite verified the scanning electronic microscopy images of SS-CPCM. X-ray diffraction and Fourier transform infrared spectroscopy results showed that no reaction occurred between KNO_3 and diatomite, performing good compatibility. According to the differential scanning calorimetry results after 50 thermal cycles, the phase change temperatures for melting and freezing of SS-CPCM with 65 wt% KNO_3 were changed from 330.23 ° C and 332.90 ° C to 330.11 ° C and 332.84 ° C and corresponding latent heats varied from 60.52 J / g and 47.30 J / g to 54.64 J / g and 41.25 J / g, respectively. The KNO_3 / diatomite SS-CPCM may be considered as a potential storage media in solar power plants for thermal energy storage.