Influence of additive element on surface oxide film ofA356 alloy

来源 :Transactions of Nonferrous Metals Society of China | 被引量 : 0次 | 上传用户:zhdj600
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
<正>The influences of RE-modification and Sr-modification on the hydrogen content and surface oxide film of A356 aluminum alloy melt were investigated. The hydrogen content of the melt was measured by reduce pressure test. The phases in the surface o
其他文献
<正>The modification procedure of anodic alumina membrane(AAM) was studied. The AAM structure after modification was characterized by nickel nanowires prepared
The coupled three-components liquid diffusion within a porous pellet was investigated.The coupled diffusion model was given according to irreversible thermodyna
【正】 本书原名《中国学生英语典型错误分析》,于1963年由上海教育出版社出版,颇受广大读者欢迎;现经修订,改用现名于1980年9月由上海译文出版社印行。这是一本很好的参考书
The possibility of substituting 72.5Cu-22.7Zn-3.4Al brass for phosphorus bronze in some case that is now extensively used for elastic component,and purifying th
近年来,由于国内部分产品的标准低于国际标准,导致国内市场与国际市场存在一定程度的"质量高差",此种情况已无法适应国内日益升级的消费需求。与此同时,2016年的全国两会政府工
The CuO doped with 5%-20% Mn(molar fraction) solids were sintered from CuO and MnO2 powder at high temperature (1 273 K) for 8 h. X-ray diffraction was used to
The effect of cold-rolling, by both a series of small passes and single-pass with different deformations as well as the subsequent annealing, on the interfacial
HACCP认证通过几年的发展,有效提高了食品生产企业的食品安全保障能力和认证机构的专业水平,并且获得了全球食品安全倡议(GFSI)技术等效的认定。新形势下,社会公众和政府监管部
报道了在室温和70℃下橡胶材料G402氟硅胶、丁腈胶5171、丁腈胶4170、贮囊橡胶用合成的高密度燃料HDF-1浸泡后性能如伸长率、邵尔硬度、重量、面积体积的变化,并与采用3号喷