论文部分内容阅读
This paper presents results of an ongoing investigation into modelling fluidized dense-phase pneumatic conveying of powders.For the reliable design of dense-phase pneumatic conveying systems,an accurate estimation of the blockage boundary condition or the minimum transport velocity requirement is of significant importance.The existing empirical models for fine powder conveying in fluidized dense-phase mode are either based on only a particular pipeline and product or have not been tested for their accuracy under a wide range of scale-up conditions.In this paper,a validated test design procedure has been developed to accurately scale-up the blockage boundary with the help of a modelling format that employs solids loading ratio and Froude number at pipe inlet conditions using conveying data of two different samples of fly ash,electro-static precipitation(ESP) dust and cement(particle densities:2197-3637 kg/m~3;loose poured bulk densities:634-1070kg/m~3:median size:7-30 μm).The developed models(in power function format) have been used to predict the blockage boundary for larger diameter and longer pipelines(e.g.models based on 69 mm I.D.× 168 m long pipe have been scaled up to 105 mm I.D.and 554 m length).The predicted blockage boundaries for the scale-up conditions were found to provide better accuracy compared to the existing models.
This paper presents results of an ongoing investigation into modeling fluidized dense-phase pneumatic conveying of powders. For the reliable design of dense-phase pneumatic conveying systems, an accurate estimation of the blockage boundary condition or the minimum transport velocity requirement is of significant importance. The existing empirical models for either powder based in fluidized dense-phase mode are either based on only a particular pipeline and product or have not been tested for their accuracy under a wide range of scale-up conditions. In this paper, a validated test design procedure has been developed to accurately scale-up the blockage boundary with the help of a modeling format that causes solids loading ratio and Froude number at pipe inlet conditions using conveying data of two different samples of fly ash, electro-static precipitation (ESP) dust and cement (particle densities: 2197-3637 kg / m ~ 3; loose poured bulk densities: 634-1070 kg / m ~ 3: median size: 7-30 μm). models (in power function format) have been used to predict the blockage boundary for larger diameter and longer pipelines (eg based on 69 mm ID × 168 m long pipe have been scaled up to 105 mm ID and 554 m length). blockage boundaries for the scale-up conditions were found to provide better accuracy compared to the existing models.