In situ Study on the Growth Behavior of Primary Al3Ni Phase in Solidifying Al-Ni Alloy by Synchrotro

来源 :金属学报(英文版) | 被引量 : 0次 | 上传用户:ruoling863
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The growth behavior of Al3Ni intermetallic compounds (IMCs) during the directional solidification of Al-10 wt% Ni alloy was investigated by synchrotron radiography. Two main growth patterns of primary Al3Ni phase, I-like and V-like, appeared during solidification, and I-like Al3Ni phase grew faster than V-like phase, which can be explained by the minimum energy criterion. The growth of I-like phase can be divided into two stages and was mainly affected by undercooling and Ni concentration. We also found that V-like Al3Ni phase can evolve into M-like phase during solidification.
其他文献
The fatigue cracking and fracture behavior of cold-drawn copper subjected to cyclic torsional loading were investigated in this study.It was found that with increasing stress amplitude,the fracture mode of cold-drawn copper gradually changes from a shear
FeGa thin film has been deposited on (100)-oriented GaAs and (001)-oriented Si substrates with different film thicknesses and laser energy densities at room temperature by pulsed laser deposition system. Materials structure and static magnetic of FeGa fil
Microalloying is an effective approach to improve the mechanical properties of γ-TiA1 intermetallic compound.Knowledge about the site occupancy of the ternary alloying element in the crystal lattice of γ-TiAl is highly demanded in order to understand the
Classical powder metallurgy followed by either hot isostatic pressing (HIPing) or repressing-annealing process was used to produce Cu-graphene nanoplatelets (GNPs) nanocomposites in this work.A wet mixing method was used to disperse the graphene within th
In this work, the shear model of metal melt flowing on vibration surface is established, and coupling effects of vibration and shear on the distribution of shear stress in melt and melt solidification microstructure are analyzed. Calculation results show
The morphological evolution of Fe-rich phases in the AlSi9Cu3Mg0. 19(Fe) alloy has been investigated with various contents of Fe, Mn, and Cr. The results show that coarse Chinese script Fe-rich phases appear in the alloy with 0. 6 wt% Fe combined with tra
Magnesium matrix composites reinforced with AlN particles were fabricated by the powder metallurgy technique. Different mixing methods were used in this study to control the distribution of AlN particles. The microstructure, thermal diffusivity and therma
A facile polyol-assisted pyro-synthesis method was used to synthesize Co3O4 nanoparticles embedded into carbon matrix without using any conventional carbon source.The surface analysis by scanning electron microscopy showed that the Co3O4 nanoparticles (~2
A polymethyltrimethoxysilane (PMTMS)/hydroxyapatite (HA) hybrid coating was successfully fabricated on a magnesium alloy by hydrothermal treatment and immersion method.The microstructure and composition of the coating were characterized by using X-ray dif