论文部分内容阅读
原装的CPU上面,散热片与CPU是紧密结合的,但很多朋友用的都是散装的CPU,散热片和风扇只是简单地用风扇下的弹簧片卡在CPU上。这种情况下,散热片和CPU的外表并非结合得很紧密,二者间留有微小的缝隙和空气。这些缝隙和空气会妨碍CPU的热量向散热片传导。要解决这个问题,你可以在买风扇的时候再捎上一小支硅胶。注意,要挑那种白色的、不透明的硅胶,也就是没有粘性的,否则你的散热片和CPU粘在一起想取下来就难了(倒可以冒充原装货了,呵呵)。把散热片从CPU上取下来,在CPU的背
The original CPU above, heat sink and CPU are closely integrated, but many of my friends are using a bulk CPU, heat sink and fan simply by the spring under the fan card stuck on the CPU. In this case, the heatsink and the CPU’s appearance are not closely integrated, leaving a slight gap between the two and the air. These gaps and air can prevent the CPU’s heat conduction to the heat sink. To solve this problem, you can take a small piece of silicone when you buy a fan. Note that to pick the kind of white, opaque silicone, that is, there is no sticky, or your heatsink and the CPU stick together to take it hard to take down (down can pretend to be the original goods, Oh). Remove the heat sink from the CPU and place it on the back of the CPU