论文部分内容阅读
现代建筑工程量的不断增加导致了抹灰工作量的显著增加。对于工厂化生产的钢筋砼制品来说是指在裱糊墙纸、油漆、粘贴人造革地板以及类似作业之前对其表面进行的抹平工作。制品上部面层成型的基本方法在一些技术文献中已有介绍,可以归纳为:用作往复直线运动、回转运动或其它运动的横梁或用在加工平面上旋转的转盘使砼混合料面层进行重新分布;用辗辊对砼进行辗平;对砼进行振动密实;一种或多种作用的复合方法等。在工厂化条件下实施这些方法可以使用
The continuous increase in the volume of modern construction projects has led to a significant increase in the amount of plastering work. For factory-produced reinforced concrete products, it refers to the leveling work of the surface of the product before applying wallpaper, painting, affixing artificial leather flooring, and the like. The basic method of forming the upper surface layer of a product has been described in some technical literature and can be summarized as: a cross beam used as a reciprocating linear motion, a rotary motion or other motion, or a rotary disk rotating on a processing plane to make a surface of a concrete mixture. Redistribution; rubbing with a crucible on a crucible; compacting the crucible; composite method of one or more actions. Implementing these methods under factory conditions can be used