论文部分内容阅读
CHINA FOUNDRY Editorial Board
【出 处】
：
中国铸造:英文版
【发表日期】
：
2019年5期
其他文献
Bending strength and fracture surface topography of natural fiber-reinforced shell for investment ca
In order to improve the properties of silica sol shell for investment casting process, various contents of cattail fibers were added into the slurry to prepare
In this study, three kinds of modified ultra-fine ceramic powders marked A, B and C, which were prepared by each of three different modifiers mixing with a comm
期刊
Combined effects of ultrasonic vibration and manganese on Fe-containing inter-metallic compounds and
The research studied the combined effects of ultrasonic vibration (USV) and manganese on the Fe-containing inter-metallic compounds and mechanical properties of
The fracture behavior of fully lamellar binaryγ-TiAl alloys is extremely anisotropic with respect to the lamellar orientation.For the fully lamellar Ti-46Al-0.
期刊
In this research, a vermicular graphite cast iron brake drum was produced by cored wire injection in a one-step method. Silica sand and low-density alumina-sili
期刊
In this research, the effect of the thixoforming temperature on the microstructure and mechanicalproperties was investigated in the thixoforming of the feedstoc
Strontium isotopic geochemistry of the Changjiang estua-rine waters: Implications for water-sediment
The Sr concentrations and 87Sr/86Sr ratios have been measured for the Changjiang es-tuarine waters with a main purpose to understand physical and chemical proce
Effect of Zn, Cu and Ni addition on microstructure and mechanical properties of as- cast Mg-Dy alloy
This paper presents some research information on the effects of Zn, Cu and Ni on the microstructure and mechanical properties of as-cast Mg-2Dy(at.%) alloys. Th
Jing-an Yang,Ph.D.,School of Materials,Tsinghua University.His main research area is ingot casting process simulation.The graduation thesis was entitled "Experi