论文部分内容阅读
仿苏6463型靠模铣床适用於直径在ф150公厘以下,自1:1到150比例的仿形铣刻与刻字刻线的工件加工。机床精度在最大直径用1:2比例切削时,比例误差及形状误差均不得超过0.07公厘(依据德国Deckel厂参考为±0.12 公厘)。在试造中遇到困难主要是对原图部件的单件技术条件与总装要求体
Imitation Su 6463 type by-mode milling machine for ф150 mm in diameter below, from 1: 1 to 150 ratio of copy milling and engraving engraving of the workpiece. Machine accuracy When the maximum diameter is cut with a 1: 2 ratio, the proportional and shape errors must not exceed 0.07 mm (± 0.12 mm according to the German Deckel factory reference). In the trial of the difficulties encountered in the main components of the original image of a single piece of technical requirements and assembly requirements body