论文部分内容阅读
1割台部分容易出现的故障与调整(1)割刀无法割断作物和夹草。原因:①动刀和定刀重合度不够。松开刀头和刀条弹片连接螺栓,把割刀摆臂转到极限位置,然后把动刀调到刀片中心线与护刃器中心线重合位置(一般偏差2～3mm),再拧紧连接螺栓即可。②动定刀间隙过大。去掉压刃
1 header section prone to failure and adjustment (1) cutting knife can not cut crops and clip grass. Reasons: ① knife and fixed knife coincidence is not enough. Loosen the cutter head and blade shrapnel connection bolts, the knife swing arm to the limit position, and then move the knife to the blade center line and the center line of the guard blade coincide position (usually 2 ~ 3mm deviation), and then tighten the connecting bolts Can be. ② move the knife gap is too large. Remove the pressure blade