论文部分内容阅读
由上海医用电子仪器厂研制的国家“七五”攻关项目“B型扇扫超声诊断仪”的重要部件-35MHz穿刺探头,已于1987年4月19日在上海通过鉴定。这一型号为SCH960 C的超声穿刺探头有80个阵元,420晶片,最大显示宽度96mm,最大显示深度180mm,采用先进的中央沟槽式,导针器和穿刺针可在其中插入、拔出,在体外对体内病灶或特定部位作活检、抽液、注药、造影、置管引流等。探头装备有导向器和角度调整器,可在-5°～+20°范围内随意改变穿剌角度。它可与该厂的CX851型、阿洛卡的SSD-256型、SSD-250型和SSD-280型等超声实时显象仪配接。经上海第六人民医院、华东医院、肿瘤
By the Shanghai Medical Electronic Instrument Factory developed the “Seventh Five-Year” key project “B-type fan scan ultrasound diagnostic device,” an important component -35MHz piercing probe, has been in April 19, 1987 in Shanghai through the identification. This model is SCH960 C ultrasonic piercing probe has 80 array elements, 420 wafers, the maximum display width of 96mm, the maximum display depth of 180mm, the use of advanced central groove, needle guide and puncture needle can be inserted in it, pull out , In vitro for the body lesions or specific parts for biopsy, pumping fluid, injection, contrast, catheter drainage and so on. The probe is equipped with a guide and angle adjuster, which can change the puncture angle freely within the range of -5 ° ~ + 20 °. It interfaces with the factory’s CX851, Allocs SSD-256, SSD-250 and SSD-280 ultrasonic real-time displays. The Shanghai Sixth People’s Hospital, East China Hospital, cancer